Which Tool and How to Program Fiat Croma All Key Lost?
Problem: I have problem with Fiat Croma 2007. 1.9jtd. The car comes to me with all key lost.I readed the dump from BSI with 9S12DG256 […]
Problem: I have problem with Fiat Croma 2007. 1.9jtd. The car comes to me with all key lost.I readed the dump from BSI with 9S12DG256 […]
Humzor NexzDAS Pro is a universal diagnostic tablet with multi functions including immobilizer key programming. Here obdii365.com provides Humzor Nissan and Infiniti key programming car list. […]
Model: 2005 Chrysler town and country USA model Situation: all keys lost Test report: 2005 town and country AKL USA no pin read by OBD pacifica […]
Question: What tool is best out of key programmers to add a key on the Smart 4 button key card Kadjar year 2016, is it […]
Question: Alfa Romeo 147 2002 with mcu mask 3k91d, vvdi prog not read mcu. Which tool can read mcu and program key? User […]
Autel XP400 chip programmer can easily do the chip read and write, key read and write on PC. Here’s the demo example on reading CAS3+ […]
Here’s the step-by-step installation and update guide of original Scorpio-LK Tango key programmersoftware. Operating system: WinVista, WinXP, Win7, Win8, Win10 *Tango Driver V4 WinVista, Win7 […]
How-to: program Mazda 6 year 2017 ID49 smart key by Autel MaxiIM IM508/IM608 when all keys lost via OBD. At least 2 keys are required. […]
Problem: My client asked to add a new key to his Nissan qashqai 2015. I followed the OBDSTAR X300 DP Plus operation, everything is OK. […]
Question: It has been very long time since I programmed Fiat Gande Punto all keys lost, usually for remote key you need to pre-code the […]
Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90 etc) updated GM security password reading models after 2018 in July 2020. GM Key […]
Here’s the engineer solution to CG pro 9s12 programmer can not detect the key chip and shows error “No found key”. 1, First remove the […]
How-to: add a spare Dodge Charger (2011-) proximity smart key with xtool x100 pad3 in less than 5 minutes including pull pin code. Connect xtool […]
The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020. Supports following Mercedes IR key programming: […]
Question: Hi all, I have a 2011 Alfa Romeo Giulietta car to do,. You reckon the xtool x100 pad2 can handle and pull the PIN […]
Device: CGDI Prog BMW key programmer Function: BMW Data repair Explanation: Supports modifying ISN, VIN and frequency in the CAS data Supports modifying the ISN, VIN in ECU […]
Question: Who can tell me what is the difference between this two tools xtool ks-01 emulator and vvdi toyota 8a adapter, I don’t understand the […]
Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about their […]
Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device […]
Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the needs of […]
How-to: program Audi Q5 5th generation immobilizer key using Xtool X100 PAD2 via OBD. Both add key and all keys lost are available. Here’s the […]
One Customer’s 2014 bmw 428i with Fem module lost keys, I’m using Autel MaxiIM IM608 key programmer, I got the Fem module unlock and made key. The only […]
Test feedback: GMC 2017 Denali. 4-digit PIN Code reading and smart key programming on OBDSTAR X300 DP PLUS. Generate remote with xhorse remote and remote […]
One of the main reasons I bought the OBDSTAR X300 DP plus (C package) was to do the Opel 2011 Insignia BCM clone the same […]
Question: Is there a page or does someone have a list where all bmw models with the corresponding ews/cas type are listed? Answer: Yes, […]
Copyright © 2024 | WordPress Theme by MH Themes
This site is protected by wp-copyrightpro.com